149 Independent Stage 11 Silver Trucks

The Paris 195mm truck gives you that extra width just in case you need it. The 195mm hanger generates less leverage when compared to a narrower hanger, which adds to stability and comfort at higher speeds. These trucks are ready to race out of the box! The 195s are built with 2 – 90a Paris bushings and a flat washer on top for added support.

This truck is your go-to downhill truck. These were built with speed in mind and that is exactly what they do well. Like all Paris Trucks, the baseplate angle is 50 degrees, which provides the perfect balance between maneuverability and stability. And they’ve got a manufacturers lifetime warranty to boot?! Unheard of!

You should pick Paris 195 Trucks if…
– You plan on bombing hills more than carving
– You’re riding a board wider than 10″

Details:

• Fits best on boards 10.5″ – 11″ wide

• 356.2 virgin aluminum gravity molded

• Secondary heat treatment for added strength & durability

• Grade 8 steel axles and branded kingpins

• Paris urethane bushings for ultimate response & rebound

• 6-hole baseplate

• Guaranteed by Paris for Life – Every new pair of Paris Trucks are guaranteed against manufacturer defects in workmanship or materials for the lifetime of the original owner. The warranty covers bent axles as well as any manufacturer’s defects that would cause the trucks to fail or be unrideable. This DOES NOT cover trucks that have been abused, stolen, or ran over by a vehicle!

Sold as a set of 2 Trucks.

The Revenge Type I is a single pivot 45° torsion truck made of 8DC12 recycle-based lead free aluminum. They are designed for carving, sidewalk surfing and for the pure thrill of turning. They are not intended to replace your conventional trucks for the skate park. Revenge trucks are too performance oriented for traditional transition-based skateboarding.

The patented external locking mechanism allows for the tightest turns with no need for riser pads even with wheels up to 73mm, resulting in a full circle on a 47″ board in less than 8 feet, all with no wheel bite! Turning has never been easier.

They are mountable with standard hardware along with two options for hole patterns, old school and new school.

The bushing is made from the highest quality high impact polyurethane, made in the USA.

Details:

• Axle Width: 8.75″
• Width: 6.0″
• Height: 3.375″
• Surface: Polished Aluminum
• Bushing: 97a High Impact Polyurethane

Sold as a set of 2 Trucks

The much anticipated Paris Savant is finally here! With the smooth lines and clean design you’ve come to know and love from Paris Truck Co, the Savant features many upgrades and downhill-specific improvements from our previous V2 design.

The Savant is the absolute perfect truck for fast downhill and freeride skating, able to handle the fastest and gnarliest terrain you can throw at them. The 180mm hanger is forged, not cast, for superior strength and tighter tolerances. The axles are dead straight, precision machined, and secured into the hanger with a patented axle lock system.

A slightly tighter bushing seat provides the additional stability needed to take your skating to 60mph+, while still giving that deep and predictable Paris turn you expect from our trucks. The Savants also feature a race-inspired machined pivot, top hat bushing washers, machined speed rings, urethane pivot cups and slop-stoppers, and are available on both 43 and 50-degree baseplates.

Details:

• Best fits 9.75″ – 10″ Boards
• 50° baseplate
• Sold as a set of 2 trucks
• Forged 6061 Aluminum Hangers. T6 Heat Treated
• Dead Straight Axles, Every Hangers Is Tested For Perfect –Alignment
• Race Spec 8mm, Grade 12 Axles
• Patented Captive Axle Lock System
• Grade 10 Steel Kingpins
• Precision Axle Washers
• 1mm Built-In Inner Speed Washers
• 96a “Slop Stoppers”
• Cast Baseplate
• Hand Poured 96a Pivot Cups
• Machined Kingpin and Pivot Holes
• 90a USA Made Double Barrel Bushings
• Genuine Anodized Hanger (Black / Red)
• Titanium Plating (Electro Luxe)
• Precision Engineering and STRONG AS F@#K!!