Independent Genuine Parts hardware is specified to the highest standards. Each set features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage.
Revenge’s newly designed bushing for Revenge Trucks. This bushing will work in all previous models of Revenge. This version has more rebound and stability then the previous bushing.
Made in U.S.A.
The bushing kit comes with:
– Two Bushings
– King Pin Nut
– Washer
(Please note: These bushings WILL ONLY fit Revenge trucks.)
Independent super soft bushings add plenty of cushion to your setup. With white urethane and a 78A hardness, they’re designed specifically to fit Independent trucks.
Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings. Harder bushings result in stiffer turns. Importantly, how tight or loose you keep your bushings also effects your skateboard’s turn responsiveness. Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings.
Made from an extremely strong steel (significantly stronger than Grade 8), these button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.
Need some lift quick? Vision has you covered. Slap these onto your deck and live your big-wheeled dreams.
Details:
Size: 1/2″
Color: Black
Brand: Vision
Will also fit old-school boards/trucks (Double drilled)
Comes as a set of two risers (enough for both trucks).
When choosing bolts to use with your shock pads: add an inch to the height of the shock pads you’re using. For example, if you’re using 1/2″ shock pads, we recommend getting 1.5″ Bolts.. etc.
Independent Genuine Parts Phillips bolts aren’t made cheap. These bolts won’t strip while you’re setting up your board, and will stay tighter for longer because that’s how Indy rolls.
Set of 8
All black bolts
Extended unthreaded shafts for minimal board damage
Will also fit old-school boards/trucks (Double drilled)
Comes as a set of two risers (enough for both trucks).
When choosing bolts to use with your shock pads: add an inch to the height of the shock pads you’re using. For example, if you’re using 1/4″ shock pads, we recommend getting 1.25″ Bolts.. etc.
Reviews
There are no reviews yet.