Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 9 × 6 × 2 in |
Revenge Bushing Kit-Soft Green
$20.00
Revenge’s newly designed bushing for Revenge Trucks. This bushing will work in all previous models of Revenge. This version has more rebound and stability then the previous bushing.
Made in U.S.A.
The bushing kit comes with:
– Two Bushings
– King Pin Nut
– Washer
(Please note: These bushings WILL ONLY fit Revenge trucks.)
1 in stock
Only logged in customers who have purchased this product may leave a review.
Related Products
1.25″ Loaded Flathead Countersunk Bolts
Got that sinking feeling again? We’ll only make it worse. New, super strong countersunk flat head hardware. We’ve got little bumps (debossed or embossed, I don’t really know) on top to further stick you to your deck. Guaranteed to smell like grease.
What’s in the box? 8 bolts, 8 nuts, and a wrench.
Intended use: Longboard
1.5″ Independent Black Phillips Cross Bolts
Independent Genuine Parts hardware is specified to the highest standards. Each set features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage.
Use these if using 1/2″ riser pad
Orangatang Nipple Bushings Orange Soft
Extra lively and energetic, these double barrel Nipples will get you all hot and heavy.
Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).
LONGBOARD BUSHING SPECS
- Diameter: 1” (25.4 mm)
- Height (top): 0.56” (14.2 mm)
- Height (bottom): 0.66” (16.8 mm)
- Formula: Randy Thane
- Durometers: soft (orange), medium (purple), hard (yellow)
RECOMMENDED WEIGHT RANGES
Soft: 75-200+ lbs / 34-90+ kg
Independent Soft Cylinder Bushings 88A
Independent Standard Soft Cylinder 88a Bushings are specifically designed for high performance skateboarding. Manufactured to your needs, these bushings are designed of properties to outlast any aftermarket bushing in the industry. Designed with an ultra high rebound for superior response time and performance.
Features:
- Sold in sets of two for both trucks.
- Ultra high rebound urethane formula
- Properly sized to fit Independent trucks (also properly fit Thunder, Venture)
- Best overall performance of any aftermarket cushion
Block Risers Gostash Combo (Hidden Compartment, GoPro Mount, Riser)
GoPro Mount, Secret Box, and a Riser all in one!
This is the ultimate BLOCK Risers package, saving you money on your individual parts and providing the the maximum functionality for your skateboard. Get it all, The BettyBOX™ Universal Risers, the GoBLOCK action sports camera mount/light mount, and the StashBLOCK secret drawer for your private goodies.
The BettyBOX™ is the world’s first universal skateboard riser that fits any skateboard deck or brand, and works with all truck setups, including drop-thru technology. Now your riser can do more than just prevent wheel-bite, it gives you the Swiss Army of shredding accessories.
Need a place to stash your keys or some extra cash?
The StashBLOCK™ acts as a hidden compartment concealing the drawer under your deck and out of sight. When you stash it, you can also be sure that it is safe and sound while locked into place. The patent pending technology allows the StashBLOCK™ to move freely when needed, or stay locked in to stay out of harm’s way when not in use.
The GoBLOCK™ provides the lowest profile mount and best point of view for your action sports camera. Tucked beneath your board and protected by your wheels and trucks, not only is the mount out of the way of your feet, but it is located in the safest place on your entire setup.
Details:
Riser: 3/8″
https://youtu.be/FpVeLnTn29k
Bones Hardcore Barrel Bushings 93A Hard
(This is a set for ONE TRUCK)
Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc.
The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. You can expect to run a softer durometer than your previous set-ups. Hardcore bushings will improve the performance of any longboard trucks.
93A BLACK/RED Hardest – for 180lb – 300lb – heavy riders, extra stability or DH / Freeride
Why Hardcore?
- Patented bonded-insert technology
- More precise steering
- Quicker response
- No break-in period
- More stability
- The BEST bushings, period.
Bones Hardcore Soft Black/Blue Bushings
Bones Hardcore bushings are designed with an internal structure that supports and strengthens the cushion to give you a better ride. Bonding high rebound Bones cushion urethane to the hard inner core gives the bushing better memory, quicker response and unlike other bushings, There is no break-in period. Just put them in, adjust and skate. Your truck will center better, your turns will be smoother, easier to control, and your bushings will not pop out of their cups.
Bones Hardcore bushings fit all major trucks Including Independent, Venture, Thunder, Tensor, Royal, and more.
1 Box/ pack is enough to outfit 2 trucks.
Hardness: 81A
Independent Super Soft Cylinder Bushings 78A
Independent super soft bushings add plenty of cushion to your setup. With white urethane and a 78A hardness, they’re designed specifically to fit Independent trucks.
Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings. Harder bushings result in stiffer turns. Importantly, how tight or loose you keep your bushings also effects your skateboard’s turn responsiveness. Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings.
- Independent skateboard bushings
- Standard cylinder shape
- 78A durometer
- Super soft cushion
- White urethane
- This is a set for both trucks
Reviews
There are no reviews yet.