Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 9 × 6 × 1 in |
1.25″ Independent Black Phillips Bolts
$2.00
Genuine Independent Phillips mounting hardware is dependable and self-locking for a better hold.
5 in stock
Only logged in customers who have purchased this product may leave a review.
Related Products
Independent Conical Bushings Soft 88A
Independent Bushings are specifically designed for high performance skateboarding. Manufactured to your needs, these bushings are designed of properties to outlast any aftermarket bushing in the industry. Designed with an ultra high rebound for superior response time and performance.
Features:
- Sold in sets of two for both trucks.
- Ultra high rebound urethane formula
- Properly sized to fit Independent trucks (also properly fit Thunder, Venture)
- Best overall performance of any aftermarket cushion
1″ Loaded Flangehead Bolts
Made from an extremely strong steel (significantly stronger than Grade 8), these button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.
Our hardware comes with a hex key.
Intended use: Longboard
Tracker Bushing Kit Medium Orange (For 2 Trucks)
Tracker replacement or upgrade bushings. Made with top quality urethane.
Color: Orange transparent Swirl
Kit includes: 2 top small cones & 2 bottom barrel bushings.
1/4″ Vision Psycho Risers
Details:
- Size: 1/4″
- Color: Black
- Brand: Vision
- Will also fit old-school boards/trucks (Double drilled)
- Comes as a set of two risers (enough for both trucks).
When choosing bolts to use with your shock pads: add an inch to the height of the shock pads you’re using. For example, if you’re using 1/4″ shock pads, we recommend getting 1.25″ Bolts.. etc.
1″ Bones Vato Bolts
A solid board calls for some solid hardware – try the Bones Vato 1″ Hardware out for size.
- 10-32 x 1″ phillips head
- high grade black zinc steel
- silver 10-32 nyloc nut
- painted white head
- free sticker included
- single pack
1″ Independent Black Phillips Bolts
Independent Genuine Parts Phillips bolts aren’t made cheap. These bolts won’t strip while you’re setting up your board, and will stay tighter for longer because that’s how Indy rolls.
- Set of 8
- All black bolts
- Extended unthreaded shafts for minimal board damage
- Cross logo heads, Full size nylon lock nuts
- Full size bolt heads w/ cross insignia
- 1″ phillips, Recyclable bolt bags
Orangatang Nipple Bushings Purple Medium
Extra lively and energetic, these double barrel Nipples will get you all hot and heavy.
Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).
- Diameter: 1” (25.4 mm)
- Height (top): 0.56” (14.2 mm)
- Height (bottom): 0.66” (16.8 mm)
- Formula: Randy Thane
- Durometer: Medium (purple)
RECOMMENDED WEIGHT RANGE
Medium: 150-250+ lbs / 68-113+ kg
1.5″ Loaded Flange Buttonhead Bolts
Made from an extremely strong steel (significantly stronger than Grade 8), these button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.
Our hardware comes with a hex key.
Intended use: Longboard
Reviews
There are no reviews yet.