Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 9 × 6 × 2 in |
Bearing Spacers
$0.25
Bearing spacers are small metal cylinders that fit into a skateboard wheel between the bearings. Their purpose is to reduce the weight distributed to each bearing, which can make your turns smoother and more stable and also extend the life of your bearings. The bearing spacer is an important, but often overlooked part when people set up their completes. These little metal “cylinders” will help your bearings by keeping them parallel in your wheels. This avoids excess side load pressures, fights over-tightening, and prolongs the life of your bearings.
- Aluminum bearing spacers
- Sold Individually, Select (QTY: 4) at checkout for a full set.
87 in stock
Only logged in customers who have purchased this product may leave a review.
Related Products
Bones Swiss Precision Bearings
Original Bones® Swiss Bearings are the optimum combination of Bones Skate Rated™ design and Swiss precision manufacturing creating the standard by which all other bearings are measured.
For more than 36 years preferred by the world’s top professional skaters.
Proven, professional competition-grade speed and durability make Bones Swiss normally last several times as long as ordinary ABEC rated bearings.
Made in Switzerland.
Features
- Single, removable, non-contact rubber shield allows easy cleaning and low friction.
- High speed nylon ball retainer provides added strength and speed.
- Pre-lubricated with Speed Cream racing lubricant
- Skate Rated; clearances, tolerances, materials and lubricant provide the best performance and durability possible.
- Best selling high end skate bearing in the U.S.A.
Contents
- Set of 8 bearings
- 4 bearing spacers
- Instructions
- Sticker
Bronson High Speed Ceramic Bearing Oil
NEXT GENERATION HIGH SPEED CERAMIC OIL
Precision aero-synthetic oil blended with nano ceramic compounds for unmatched speed & wear protection. Superior protection for bearing surfaces from moisture, rust and corrosion.
1.5″ Independent Black Phillips Bolts
Independent Genuine Parts hardware is specified to the highest standards. Each set features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage.
Use these if using 1/2″ riser pad
Bronson Raw Bearings
Next Generation Bearings, Designed for Today’s Skateboarding.
The fastest, strongest, longest lasting, longest spin skateboard bearing ever made.
Shield Free Design
- No more shields to get damaged or pop off — the first shield-less bearing designed for skateboarding
- No shield grooves in either race for no crud, dust and dirt build up – super fast sound and spin
Fast, Slick & Non-Stick
Tungsten Coated Races
- Micro-thin tungsten dry lubricant coating is fast, slick and non-stick to minimize dirt, dust and crud build up.
- Tungsten coating is an extremely slick, low drag, dry film lubricant with a very low coefficient of friction
Audible Speed Technology
- Fully open, high spin, and shield free — RAW’s are designed to enhance the sound of speed.
- Run your bearings with no shields? Like a RAW sound? This bearing’s for you!
Cage Design
- Super strong, durable, non-distortion fiberglass filled pure nylon cage keep the balls precision spaced.
- High wear and tear resistance, improved performance in an increased dust and dirt environment.
Deep Groove Raceways
- Balls sit and roll deeper in the raceway channels than weaker shallow groove designs.
- Dramatically reduces axial and angular side impact damage and breakage, surfaces stay smooth and fast.
Bones Hardcore Medium Black/Gold Bushings
Bones Hardcore bushings fit all major trucks Including Independent, Venture, Thunder, Tensor, Royal, and more.
With BONES Bushings™, you will notice a number of positive improvements in the performance of your trucks.
- There is no break-in period. Just put them in, adjust and skate.
- Your trucks will be more responsive.
- Increased truck performance
- Improves your skating experience.
- Your turns will be smooth and positive, not floppy or rigid.
- Hardness: 91A
- 1 Box/ pack is enough to outfit 2 trucks.
Bones Hardcore Barrel Bushings 93A Hard
(This is a set for ONE TRUCK)
Hardcore™ Bushings are barrel bushings which will fit in ALL longboard trucks that use standard height bushings such as Aera, Caliber, Paris, Randal, PNL, etc.
The insert greatly increases the precision of your truck by limiting side to side movement of the hanger, increasing rebound, stability, and steering. You can expect to run a softer durometer than your previous set-ups. Hardcore bushings will improve the performance of any longboard trucks.
93A BLACK/RED Hardest – for 180lb – 300lb – heavy riders, extra stability or DH / Freeride
Why Hardcore?
- Patented bonded-insert technology
- More precise steering
- Quicker response
- No break-in period
- More stability
- The BEST bushings, period.
1.5″ Loaded Flange Buttonhead Bolts
Made from an extremely strong steel (significantly stronger than Grade 8), these button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.
Our hardware comes with a hex key.
Intended use: Longboard
1.25″ Loaded Flathead Countersunk Bolts
Got that sinking feeling again? We’ll only make it worse. New, super strong countersunk flat head hardware. We’ve got little bumps (debossed or embossed, I don’t really know) on top to further stick you to your deck. Guaranteed to smell like grease.
What’s in the box? 8 bolts, 8 nuts, and a wrench.
Intended use: Longboard
Reviews
There are no reviews yet.