Deck, grip, trucks, bearings, wheels and hardware sold separately, and must be purchased at the same time as installation or your order will be cancelled.

Bearing Installation/ Removal
Bearing Installation/ Removal

Tired of pressing your bearings in by hand? Wish your wheels could just show up fully set up out of the box? We’ve got you covered.

 

We’ll press your bearings in for you for free! Just add this listing along with a purchase of wheels and your preferred bearing to the cart and we’ll take care of the rest.

 

Bearings sold separately, and must be purchased at the same time as installation or your order will be cancelled.

(We can also pull old bearings out of your wheels to replace with new ones. If you have an existing wheel you would like to keep using/ have new bearings pressed into, please give us a call at (402)556-8500 and we would be happy to assist. Note: you must be local and able to bring us the wheels.)

 

Optional- these do not come with, but you may consider also adding these to your cart.

 

Bearing Spacers

  • if you’ve purchased Bronson G2 Bearings, there is no need for bearing spacers as they come with!

Bearing spacers are small metal cylinders that fit into a skateboard wheel between the bearings. Their purpose is to reduce the weight distributed to each bearing, which can make your turns smoother and more stable and also extend the life of your bearings. The bearing spacer is a very important, but often overlooked part when people set up their completes. This is an especially prevalent issue with new skaters and first-time skateboard purchasers. These little metal “cylinders” will help your bearings by keeping them parallel in your wheels. This avoids excess side load pressures, fights over-tightening, and prolongs the life of your bearings.

not rated $0.00 Add to cart
Complete Skateboard Assembly
Complete Skateboard Assembly

We put your board together for you, free of cost!

(Add this to your cart if you want us to assemble your deck!)

Deck, grip, trucks, bearings, wheels and hardware sold separately, and must be purchased at the same time as installation or your order will be cancelled.

Note: To build a complete you will need;

  • a Skate Deck
  • Griptape
  • Trucks of the correct size
  • Bearings
  • Wheels
  • Hardware (Bolts) of the correct length

 

Optional add ons- ( These are not included free with assembly, but we can put them on for you if you purchase them)

  • Shock Pads: Broken skateboards suck. You’ll have fewer of both when you add a set of skateboard risers to your setup. These plastic or rubber inserts are placed between the deck and the truck to absorb shock and help to protect your board from stress fractures around the trucks/ bolt holes. They also absorb some of the impact from landings, reducing stress on the deck and prolonging its lifespan.

 

  • Bearing Spacers: Note- if you’ve purchased Bronson G2 Bearings, there is no need for bearing spacers as they come with!

Bearing spacers are small metal cylinders that fit into a skateboard wheel between the bearings. Their purpose is to reduce the weight distributed to each bearing, which can make your turns smoother and more stable and also extend the life of your bearings. The bearing spacer is a very important, but often overlooked part when people set up their completes. This is an especially prevalent issue with new skaters and first-time skateboard purchasers. These little metal “cylinders” will help your bearings by keeping them parallel in your wheels. This avoids excess side load pressures, fights over-tightening, and prolongs the life of your bearings.

 

  • On some applications, risers may be necessary to eliminate wheel bite. Essentially they create more space between the deck and your trucks so that your wheels don’t rub the board as you turn/ do tricks. This is often only necessary with larger wheels on a setup. If we suspect your board may have issues with this, and we are assembling it for you, we will contact you to see if you would like to add them to your deck.

 

FAQ:

Q: What happens if I select the wrong size of Trucks, Bolts, or Griptape for my board?

A: We will reach out to you via phonecall or email to see if your selection was intentional, or to find an appropriate substitute.

 

Q: What if I don’t know what size of trucks I need?

A: If you have any questions about sizing, or other options or details on a deck, please give us a call at (402)556-8500 and we would be happy to chat with you about what would fit best.

 

not rated $0.00 Add to cart
Griptape Installation
Griptape Installation

Always get bubbles in your grip? Tired of putting it on yourself? Say no more, we’ve got you covered.

 

Add this to your cart along with a deck and some grip, and we’ll grip your board for you for free!

 

Note: Griptape and board sold separately, and must be purchased at the same time as installation or your order will be cancelled. We will not Remove existing grip from a board to re-grip.

not rated $0.00 Add to cart